dspFlash™ Programmer for Sharc and Blackfin

dspFlash Programmer Software Screen

  • Programs Blackfin DSPs
     
  • Programs SHARC DSPs
     
  • Supports serial and parallel flash memory
     
  • Supports Intel Hex & ADI loader (ldr) file formats
     
  • Standalone Windows Program
     
  • Fast programming - Hot swappable
     
  • USB Bus Powered

Danville's dspFlash™ SHARC & Blackfin Programmer 2.0 is a production programmer that allows you to write to the flash memory on your Blackfin or SHARC embedded board.  Thousands of DSP & flash combinations are supported. All you need is a standard ADI JTAG connector on your target.

The dspFlash Programmer is fast. It uses proprietary JTAG commands that allows the DSP to program its own flash. The dspFlash Windows application is production operator friendly. All you need is a Windows 2000, XP or Vista PC.

More >>

Analog Devices' Development Tools

Danville engineers use Visual DSP++ and ADI Emulators (ICE) everyday. We understand development.

So, if you have a need for Visual DSP++ or an in-circuit-emulator, please consider us as your one-stop shop for ADI tools. We certainly would appreciate your order.

More >>


Tone Notching & AGC for Air Traffic Control Applications

control_tower_150x155.jpg

Danville Signal Processing, Inc. has been supplying tone suppression (tone notching) systems to the US FAA since 1998.

Our first installation was in Anchorage, Alaska. During our first visit to their facility, they reported 4 tone incidences in just one week. This was admittedly a bit unusual.

Since our equipment was installed, there has never been a significant tone incident at this facility. We have continued to update the technology. We have tone suppression systems in many FAA installations in the US.

More >>
 
Analog Devices ADSP-21469 SHARC DSP has arrived!
dspblok 21469+USB DSP Module

Analog Devices' ADSP-21469 is the most powerful SHARC ever! Link ports, DDR2 memory, algorithm accelerators, rich peripherals and 2 billion floating point MACs/sec make the ADSP-21469 a great choice for embedded floating & fixed point DSP embedded applications.

Danville Signal has a large selection of ADSP-21469 DSP modules. Our dspblok family can jump start your next project with off-the-shelf DSP Modules that include 1Gb DDR2, flash & EEProm memory.

Development couldn't be easier. The pin compatible, dspblok 21469 with ICE versions include an Analog Devices' EZ-KIT Lite "style" debugger and are supported by Visual DSP++ 5.0.

More >>

 

High Performance Audio 

Danville Signal's new dsprak™ is a high performance module-based audio platform that allows you deliver state-of-the art dsp-based audio systems from 8 to 32 channels.

Our new dspMusik™ 2/8 is a smaller non-rack mount version that supports 2 audio inputs, S/PDIF and 8 audio outputs. Its great for high performance speaker crossovers and bass managment systems or high performance audio decoders.

More >>

 

 

dsprak High Performance Audio Platform

 

 

dspMusik™ AWD Supports DSP Concept's Audio Weaver

audio_weaver_demoboard_side_175x153.jpg

Audio Weaver is a great way to create production quality applications in a very short time. It provides a large library of optimized software modules that run on Sharc and Blackfin based hardware platforms.

A graphical interface allows you to tune your system in real time.   

Audio Weaver is supported on many Danville platforms including dsprak and dspstak. You can get acquainted with the Audio Weaver Demo board.

More >>