Danville Signal - Your Partner for SHARC-based DSP Boards, Hardware and Systems

The dspblok™ 21369+fpga are highly integrated digital signal processing DSP & FPGA Modules that combine an Analog Devices’ ADSP-21369 SHARC DSP with an Altera Cyclone III FPGA. The board includes SDRAM, flash and EEProm memory. An on-board switching power supply supports the core voltage reqiuirements of the DSP and the FPGA so that only 3.3V is required to power the module. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36").

The dspblok 21369+fpga modules are pin compatible with our dspblok 21369zx DSP Module. Two versions are available. The dspblok 21369cy05 uses a Cyclone III EP3C5 and the dspblok 21369cy25 uses the more powerful Cyclone III EP3C25.

The dspblok 21369+fpga is supported by a family of dspblok power supplies, data converter modules and digital I/O modules. The dspblok ps-usb can be used upload DSP code and FPGA configuration files to the dspblok 21369+fpga. All you need is a simple terminal program and a USB cable to program the on-board flash. 

Options and Accessories for the dspblok™ 21369+fpga Modules

dspstak DSP/FPGA JTAG Adapter

The Danville DSP/FPGA JTAG Adapter expands the Danville JTAG header for boards that include an Analog Devices DSP and an Altera FPGA. It is not compatible with the Danville DSP JTAG Adapter. The breakout connectors are a 14 pin Analog Devices JTAG Header and a 10 pin Altera USBBlaster Header.

Purchasing Information

This Product Available Thru Online E-Store